USAfixTM - Repair Guide (RG) - Master Email RG
- Pump Fuse Install
 Level of Difficulty - EASY  Estimated Completion Time - 15 minutes
TASKI - SWINGO 5000

Tools Required
Tool 
Screwdriver-flat tip
Torx T30

Parts Required
PartDescriptionPriceAvailablePurchase
192-2597 Fuse holder $50.86 Back Order Qty:


Step Procedure & Parts & Tools
1 Open Tank Lid

2 Using T-30 Torx, Loosen 2 screws on rubber buffers. Complete removal of screws is not needed.
Torx T30

3 Once rubber buffers of loose, separate the lower plate from tank lid

4 On terminal block, locate Red pump wire. Loosen set screw with small flathead screwdriver.
Screwdriver-flat tip

5 Insert Red pump lead into new connection block that is included in the fuse holder kit (192-2597). Tighten with flathead screwdriver
Screwdriver-flat tip

PartDescriptionPriceQty
192-2597 Fuse holder $50.86 Qty:  
6 Take free red wire from Fuse Holder...insert it now into the large terminal block. Tighten with flathead screwdriver. Install now complete...reverse steps 1-3 to seal up tank lid.
Screwdriver-flat tip

PartDescriptionPriceQty
192-2597 Fuse holder $50.86 Qty: